Created by potrace 1.10, written by Peter Selinger 2001-2011
YOUR STORE: Perth, WA

A Brief Guide To Choosing And Using A Telehandler For Hire

There are many reasons why a business or project manager might look at telehandler for hire. Perhaps the usual equipment is in dire need of servicing or a more complex repairs? Maybe a new project has come up that needs a telehandler, and you don’t have one in your fleet of equipment? Has the workload increased, and your telehandler is unable to handle the capacity of work? These are all valid reasons to get a telehandler for hire, but it’s important to understand your specific needs before you make a final hiring decision. As well as how to use it once you receive it.

Assess your work site before choosing a Telehandler for hire

The telehandler for hire that you choose must be able to cope with the demands of your work site. Take some time to assess the area, identify any obstacles and determine the surface conditions. If you have any hazards, such as power lines or narrow gaps, work out how they could be negotiated safely. In case the work site is located outdoors, and you have rougher terrain, this will also dictate some of your equipment choices. And with this information, you can narrow your choices. If you’re in any doubt, contact Access Hire, and we will help you to choose the best Telehandler for hire according to your needs.

Transporting Loads

It’s important to have the right carriage and forks to handle and transport the materials that you’re working with. These loads will need to be balanced on the forks, and they should be fully supported. The load needs to be organised well. If necessary, retain it by a series of straps. Adjust the fork spacing when the pallet is lifted to ensure they engage correctly.

Positioning a Telehandler

Once you have your load organised, it’s time to position the telehandler to start work. Park the telehandler in place on a level surface whenever possible. If the telehandler is located on a rougher surface, level it with stabilisers before starting work. It’s important to understand that the boom and attachments should not be raised more than 1.2 metres unless the telehandler is stable. Any movement made at or near the maximum operating height should be made slowly and deliberately. When a telehandler is positioned and operated in this manner, the chances of tipping are significantly reduced.

Keep the Area Clear

From a safety perspective, it’s always a great idea to be aware of where other people are located and limit their access to the immediate area. A telehandler for hire should be used to lift workers wearing safety equipment to protect against falling. The telehandler operator should be seated in the cab when the equipment is in use. Any workers or members of the public moving through the area are at risk of injury from dropped tools or materials. If you want to control access to promote safety, it’s a good idea to cordon the area using bollards or other temporary fencing systems.

If you’re looking for competitive telehandler for hire rental rates, contact us here at Access Hire, and we will be happy to help

Contact Us